HP Printer Won’t Turn on? Follow The Best Fixes For The Problem

As we know, HP Printer produces high workability and functionality printers every year for the user’s benefit. But unfortunately, you can’t expect the printer to run without any hassle. Users have recently reported the HP printer won’t turn on. You may feel your printer might shut down shortly during the procedure of the printing task. Even after lots of failed attempts, the users are finding it difficult to operate the printer on their own. the root cause of this issue is mainly due to some hardware problems. If you detect this error, use the below steps to easily deal with & sort out the printer issues for hassle-free access. 

Fixes To Use When HP Printer Does Not Turn On

Rather than hardware issues, you might also get this type of error for poor connection on your printer device. Utilize the below guidelines to bring the best in printer access.

Test The Power Source With A Different Power Cord.

  • Safely unplug the cords from the power strip or wall outlet.
  • Try to connect the desired printer to another working outlet.
  • Carefully, turn ON the printer. If it is still unable to turn ON, use the below steps.
  • Locate the cord with the same connection as the printing device’s power cord. Try to link the cord to the wall outlet and the other end to the printer.
  • Attempt to turn ON the printer.

Perform A Manual Reset To Restore The Printer’s Power After A Power Outage

  • Initially, you have to disconnect the respective power supply from your HP printer.
  • Eventually, uninstall all the installed ink cartridges.
  • You are supposed to wait for at least 60 seconds or 1 minute.
  • Then, try to link the power cord back to the printer.
  • Turn ON the printer. still, if you find your printer is unable to turn ON, try to proceed below.
  • Further, try to insert the printer ink cartridges. If you find any open doors or lids, try to close them.
  • Attempt to turn ON the printer again and if not applicable- try to continue with the below-given guidelines. 

Disconnect The USB Connector

Still, you couldn’t find any solution for your printer issue. Proceed with this, just locate the USB connector which is located at the back of the HP printer. Disconnect it and turn ON the printer. If you notice that the printer is initiating seamlessly, then your USB cable is the culprit. Rectify it by removing and replacing it properly.

Set Your HP Printer As The Default

A common report of the users according to the stats is- Why my printer is not turning ON?  It can be due to several reasons like when multiple printers have synced to the computer, the print task may be assigned to any of the printers present in the list of printer names connected to the computer. To avoid such issues, you have to place the desired printer on the default printer. Use the below steps to bring back the printer to the default printer.

  • Make use of the Control Panel>Devices and Printers.
  • Try to find the desired printer from the shown printer names list.
  • Right-click and select Set as default printer.
  • Give Yes if a prompt message shows up.

Turn The Printer On After A Paper Jam.

Paper jam is another main reason for the printer to get in this error. Try to restart the printer and if your printer has backup support- proceed below

  • Take the presented paper on the tray and clean the tray.
  • Virtually inspect the trays, rollers, and other metal parts.
  • Eventually, take away the paper sheets in the input tray.
  • Then, ensure the selected paper sheets’ quality and proceed to rearrange the paper sheets again.
  • Safely unplug the printing device from its wall outlet.
  • Try to disconnect the cords which are connected to the printing device.
  • Relax for a few minutes.
  • Take the connectives to connect the printer’s rear end.
  • And the other end to the wall outlet.
  • Finally, use the power button to turn ON.

Inspect If The External Power Module Is Compatible With The HP Printer

Locate the external power module’s preferences on your printer spec. Use the HP Manufacturer website to know more details.

  • Inspect the voltage and other needs required for stable access. Try to ensure whether the report obtained has matched the specification of the printer.
  • If at all your printer is incompatible, try to get a replacement module that goes well with the HP printer model. For more details use the HP Parts Store website.

Recycle Power To Your Printer.

As resetting can relieve you from minor issues like HP printer does not turn on. Use the below steps to reset the printer device.

  • Try to disconnect the power cord from your printing device.
  • Wait for a few minutes to get back.
  • Now, reconnect the printer using its appropriate connections ports using HP Manual.
  • Safely, plug the cable directly into the wall outlet.
  • Use the below steps to power on/off cycle reference to your printer model.
  1. Printers with the Power button should press and release this button.
  2. Printers with a Power switch should press it for the OFF position. Then, press again to get ON position. If still, it’s not working- again press the power button. 

Free Your Printer From A Shutdown Loop. 

  • Download and install the HP Print & Scan Doctor.
  • Utilize the Ethernet cable or a USB to interface the desired HP printer.
  • If your printing device is under ON status, run HP Print and Scan Doctor.
  • Wait for your printer name from the list of printers available.
  • Select the option ‘Fix Printing.’
  • Follow the troubleshooting steps to fix it.

Call our Experts to instantly fix the HP Printer not turning ON Printer issue.