HP Envy 7640 Printer Setup and Driver Download

A complete instruction guide for HP Envy 7640 printer with the latest drivers and software for both Windows and MAC Driver download!

HP Envy 7640 Printer - Overview

The HP Envy 7640 printer is one of the best all-in-one printers that come with novel features. It is a wireless printer that allows the printer to be wireless. Setting up the HP Envy 7640 printer can be completed with a few simple steps to set up the HP Envy 7640 printer can be completed with a few guidelines. The HP Envy 7640 printer is wireless. With an active connection, the printer can be connected.

Complete the printer connection of the printer with the printer guidelines. If there are issues with setting up the HP Envy 7640 printer, contact us for further assistance.

What do we assist you with?

HP Envy 7640 Printer Setup - Guide

Follow the below instructions to complete the HP Envy 7640 printer setup.

  • Open the HP printer box and place it on a flat surface.
  • Remove the HP Envy 7640 printer from the box.
  • Place the HP Envy 7640 printer in a safe spot. The printer should be close to the device and the wireless connection.
  • Connect the power cord to the printer and the power supply. Turn the printer on.
  • Load the HP Envy 7640 ink cartridges into the printer and load the paper tray with paper.
  • On the device, download the HP Envy 7640 printer driver and complete the installation.
  • The final step is to connect the printer to the wireless connection and the full set-up of the HP Envy 7640 is complete.
HP Envy 7640 Setup

HP Envy 7640 Driver Download & Install

Complete the installation of the HP Envy 7640 printer using the below guidelines to complete the installation of the driver.

HP Envy 7640 Driver Download & Install – Windows

The princess below will assist in the process of downloading the HP Envy 7640 driver.

  • Power up the Windows device to begin the HP Envy 7640 driver installation.
  • Make sure there is an active wireless connection the printer can connect to.
  • Open the HP Support website and download the HP Envy 7640 driver.
  • Run the downloaded file and complete the installation by following the on-screen instructions.
  • Complete the process by following the instructions and clicking Finish at the end of the process.

HP Envy 7640 Driver Download & Install – MAC

Complete the process of downloading and the installation of the HP Envy 7640 for a Mac device.

  • Power up the HP Envy 7640 printer and Mac.
  • Enter the details of the HP support website.
  • Choose the driver and enter the details of the printer.
  • Enter the name – HP Envy 7640 and choose Mac OS.
  • Complete the installation of the HP Envy 7640 driver.
  • Follow all the on-screen instructions to complete the process.
  • Click Finish and the installation of the HP Envy 7640 driver.

HP Envy 7640 Wireless Setup

The final step in setting up the HP Envy 7640 printer is to connect the wireless connection. Follow the below instructions to complete the wireless connection.

HP Smart App

Complete the below steps to download the HP Smart app for the HP Envy 7640 device.

  • Power up the HP Envy 7640 printer and the Mac or the Windows device.
  • Open the app store on the device and locate the HP Smart app.
  • Download the application and install it. Open the HP Smart app and log in.
  • Locate the + icon and add the printer. On locating the HP Envy 7640 printer, select it.
  • With this, the HP Envy 7640 printer will be added to the HP Smart app.

Wireless Setup Wizard

Follow the instructions to complete the Wifi Network setup of the HP Envy 7640

  • Power up the HP Envy 7640 printer and complete the process of connecting the HP Envy 7640 to the wireless connection.
  • Move over to the HP Envy 7640 printer and choose the wireless icon. Choose wireless settings.
  • Make sure there is an active and wireless connection the printer can connect to. Make a note of the wireless credentials.
  • Choose the Wireless set up wizard and a list of wireless connections will appear.
  • Select the desired wireless connection and enter the password. Click OK.
  • With this, the wireless connection will be established within a few seconds.

HP Envy 7640 troubleshooting

HP Envy 7640 not working

Follow these instructions to resolve the issue of the HP Envy 7640 printer

  • Power up the HP Envy 7640 printer and the device.
  • Check if the printer is set as the default printer. To make this change open the Control Panel.
  • Check if the wireless connection is active. Note that the device and the printer are connected to the same wireless connection.
  • Reboot the HP Envy 7640 printer by removing the power cord from the printer.
  • Remove the power cord from the rear end of the printer and then the power supply.
  • Allow the printer to remain turned for a while and then connect the power cord back to the printer.
  • Check if there is a driver update and complete the update process of the HP Envy 7640 printer driver.
  • With these changes, the HP Envy 7640 printer should be able to function normally again.

HP Envy 7640 fails to print documents

Follow the below steps to complete the installation of the HP Envy 7640 printer

  • Power up the HP Envy 7640 printer and the device.
  • Make sure the wireless connection is active. The printer and the device should be connected to the same wireless connection.
  • Following this, check if any print jobs are stuck.
  • Open the list of print commands and remove it all.
  • Following this, restart the printer and check if the issue has been resolved.
  • Replace the paper that is being used with high-quality paper to avoid further printer issues.

HP Envy 7640 Factory reset

Follow the instructions to assist in the process of restoring the HP Envy 7640 printer to the factory settings.

  • Power up the HP Envy 7640 printer and move over to the printer’s display.
  • Choose the Setting menu and scroll down to Restore Default.
  • Click Yes on selecting the HP Envy 7640 restore default settings.
  • Once permission is given the printer settings will be reset to the factory settings.
  • Restart the HP Envy 7640 printer and then, make whatever changes and settings should be made based on your preference.

HP Envy 7640 is not online

These steps below should assist in the process of removing the HP Envy 7640 printer is not an online issue.

  • Power up the HP Envy 7640 and choose the Start option.
  • Open the Settings app choose the Control Panel.
  • Locate the HP Envy 7640 printer and right-click.
  • From the pop-up menu, choose Use Printer Online.
  • Select it and then complete the changes that should be made to the HP Envy 7640.