HP Envy Photo 6252 Printer

Complete the download and installation of the HP Envy Photo 6252  printer driver using the guidelines mentioned here.

HP Envy Photo 6252 Printer - Overview

The HP Envy Photo 6252 is an all-in-one printer that comes with wireless features, making connectivity and usage efficient. To be able to utilize the printer to its maximum ability, the printer has to be set up, drivers download and installed and connected to a wireless connection. The instructions for the set-up of the HP Envy Photo 6252 printer has been mentioned and added below. Or, contact us for direct assistance.

  • Place the printer on a flat surface and remove it from the box.
  • The HP Envy Photo 6252 printer should be placed in a proper location.
  • It should be close to the device, the router and the power supply.
  • Remove all the protective material from the printer both inside and out.
  • Use the power cord to connect the printer to a power supply.
  • Connect one end of the power cord to the rear end of the printer.
  • Then, connect the other end of the power cord to the power supply.
  • Switch on the power supply and the printer will be turned on.
  • Load the ink cartridges into the allotted place through the access door.
  • Draw out the paper feeding tray and load the tray with sheets of paper.
  • Download the HP Envy Photo 6252 driver and install it.
  • Connect the HP Envy Photo 6252 printer to a wireless connection.

With this, the set-up of the HP Envy Photo 6252 printer driver can be completed.

HP Envy Photo 6252 setup

HP Envy Photo 6252 Driver Download and Install

Follow the guidelines as added below to complete the process of downloading and installation of the HP Envy Photo 6252 printer driver.

HP Envy Photo 6252 Driver for Windows

  • With the printer physically set up, move over to the next step of downloading the driver.
  • Move over to the device the HP Envy Photo 6252 printer will be connected to.
  • Open a suitable web browser and enter the details of the website.
  • Following this, enter the details of the printer.
  • The details that should be entered is the model name – HP Envy Photo 6252 and the OS.
  • Choose the OS from the drop-down menu and choose Windows OS.
  • Based on the details that have been entered, the printer driver should be downloaded.
  • The process by running the file to initiate the installation of the HP Envy Photo 6252 driver.
  • Follow all the on-screen instructions and give access and permissions wherever needed.
  • Complete the installation process by connecting the printer to a wireless connection.

HP Envy Photo 6252 Driver for Mac

  • After the first-time set up of the HP Envy Photo 6252 printer, move on to downloading the HP Envy Photo 6252 driver.
  • Move over to the Mac, open a web browser and enter the details of the website.
  • Key in details as prompted by the website such as the model name – HP Envy Photo 6252.
  • Choose the right operating system – Mac OS.
  • Based on the details that have been entered, a list of available printer drivers will be available for download.
  • Choose the all-in-one printer driver and initiate the download process.
  • Complete the installation of the HP Envy Photo 6252 printer driver by running the file.
  • Follow all the on-screen instructions by giving access and permissions wherever needed.
  • Connect the HP Envy Photo 6252 to a wireless connection as the last step and click Finish.

HP Envy Photo 6252 Wireless Setup

HP Smart App

  • Move over to the device the printer will be connected to and open the app store.
  • Enter details of the HP Smart app in the search bar, download and install it.
  • Ensure there is an active wireless connection to the printer and the device.
  • Open the installed HP Smart app and complete the instructions on-screen.
  • Click Sign in if there is an existing account, if not, register for a new account.
  • Locate a + icon on the app. Click on it to add the HP Envy Photo 6252 printer.
  • On clicking +, a list of wireless printers will appear on the screen.
  • Choose the HP Envy Photo 6252 printer from the list.
  • Give it a few minutes and the connection will be established.

Wireless Setup Wizard

  • The final step of setting up the HP Envy Photo 6252 printer is to connect it to a wireless connection.
  • There must be an available wireless connection for the printer to connect to.
  • Make a note of the wireless connection’s credentials such as the Network Name and the password.
  • The installation wizard at the end of the installation process will prompt a connection.
  • Or, move over to the printer and choose the Network Settings, scroll down and choose Wireless Setup Wizard.
  • Choose a wireless connection and a list of available wireless connections will appear on the screen.
  • Choose the desired wireless connection using the name and enter the password.
  • Give it a few minutes and the connection will be established.
  • With this, the HP Envy Photo 6252 printer is now connected to a wireless connection.

HP Envy Photo 6252 Troubleshooting

HP Envy Photo 6252 Printer not Working

  • Power up the HP Envy Photo 6252 printer and allow it to remain idle for a few minutes.
  • Move over to the printer settings to ensure all the settings are in place.
  • If there are changes that should be made, make the changes at once.
  • Check if the printer is connected to a wireless connection.
  • Run a quick check of the wireless connection. It should be active and stable.
  • Complete a quick speed test as it should be functioning at a required speed.
  • The compatibility of the HP Envy Photo 6252 printer should also be checked.
  • Proceed further to ensure the HP Envy Photo 6252 printer driver is updated.
  • The same should be completed for the device. The device software should be updated.
  • After these changes have been implemented, restart the HP Envy Photo 6252 printer.
  • Complete a final check. If not, contact our teams for assistance.

HP Envy Photo 6252 Printer Fails to Print Documents

  • Begin the process by switching on the HP Envy Photo 6252 printer.
  • Check if the printer has indicated it is in an active state to the printer.
  • Ensure there is sufficient ink in the ink cartridges.
  • Check the paper feeding tray for high-quality sheets of paper.
  • If there is an issue with the ink cartridge, replace it.
  • If there is paper needed in the paper feeding tray, fill it up.
  • Check the HP Envy Photo 6252 printer for a paper jam.
  • If there is a paper jam, remove the stuck paper, leaving no traces behind.
  • Remove all the pending print jobs of the printer.
  • Restart the HP Envy Photo 6252 printer and the issue will be resolved.
  • Contact us for more assistance to troubleshoot the HP Envy Photo 6252.

HP Envy Photo 6252 printer is not online

  • If the printer is turned on, turn it off by removing the power cord.
  • Remove the power cord from the rear end of the printer.
  • Connect the other end of the power cord from the power supply.
  • This will switch off the printer causing it to restart.
  • Allow it to remain idle for a few minutes and connect it back.
  • Connect the power cord to the printer and then the power supply.
  • The printer will be powered up automatically.
  • Check the printer settings through the control panel.
  • The printer should be set to function online.
  • Make the HP Envy Photo 6252 printer the default printer.

HP Envy Photo 6252 Factory Reset

  • Power up the HP Envy Photo 6252 printer.
  • Move over to the printer’s control panel.
  • Choose Setup, tools option and Restore Default Settings.
  • Click OK to give your confirmation and proceed.
  • Follow all the on-screen instructions to ensure that the changes have been made.
  • Further changes to the HP Envy Photo 6252 printer settings can be made, based on the preferences needed.