The simple instructions for HP Officejet Pro 8020 printer setup are:
- Unpack the package of the OJ Pro printer.
- Take the OJ Pro printer from the pack.
- Place the printer where an electric outlet is there.
- Clear off the coverings from the outside and inside portion of the printer.
- Get a stable USB cord and tear off the covering materials from the cord.
- Now, ensure that the cord has no damage.
- Then, connect the USB cord’s one end to the OJ Pro printer.
- After that, connect the other end of the cord to the electric outlet.
- Activate the electric outlet and ON the printer by pressing its power button.
- Access the HP OJ Pro printer ink cartridge slots and open them.
- Check the cartridge slots and confirm they do not have any issues.
- Get the proper ink cartridges and confirm that they are appropriate.
- Insert the new cartridges into the HP printer ink cartridge slots.
- Close the HP OJ Pro 8020 printer ink cartridge slots.
- Now, open the HP Officejet Pro 8020 paper tray.
- Get a bunch of papers suitable with the OJ Pro printer and place them in the tray.
- Close the HP 8020 paper tray.
- After that, switch ON the desired device and confirm to have accurate Wi-Fi.
- Download HP Officejet Pro 8020 driver on the computer.
- Install the OJ Pro printer driver using the wizard procedure.
- Finally, try printing with HP Officejet Pro 8020 printer.

Note:
Use the USB cable and cartridge from the box for an error-free printer setup.